Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 5mm Phillips #1 screws that connect the black outer shell to the silver back of the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 5mm screws on the left and right side panels.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the black cover to a 45 degree angle from the rear of the device and pull the cover away entirely.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the metal spudger to remove the white clip from the antenna by prying the clip away from the antenna.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two 7mm screws from both sides of the antenna.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the antenna inwards and gently remove.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.