Dymo LabelManager 280 Keyboard Replacement

Introduzione

This guide leads you through the process of opening up the LabelManager and changing the keyboard. Keep in mind that the device has loose parts. Be careful and keep track of all parts.

Cosa ti serve

Passo 1 Rear Case

Dymo LabelManager 280 Keyboard Replacement, Rear Case: passo 1, immagine 1 di 2

Dymo LabelManager 280 Keyboard Replacement, Rear Case: passo 1, immagine 2 di 2

Remove battery.
Remove the label cassette.

Modifica

Passo 2

Remove the 6 screws in the indicated places. These particular screws are 2mm x 8mm Phillips #0 head

Modifica

Passo 3

Use the spudger to take apart the device by insterting it as shown in the picture and twisting it. This should be done all around the device to ensure the two parts split correctly.
The keys/buttons highlighted in the second picture fall out easily so be careful. Keep device faced down in order to keep them from falling.

Modifica