Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
This part of the bracket consists of the circuit board enclosed in a plastic housing, which we will tear down in the next step.
-
These connectors plug into the USB headers on the motherboard.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:Phillips #1 Screwdriver$5.49-
Use a Phillips #1 screwdriver to remove the four screws from the white casing and the two screws from the metal bracket.
-
The two USB 2.0 ports.
-
The four LED lights, which light up depending on the activity of the USB ports.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Raise the three connectors from the case and it's out!
-
The connectors highlighted in red lead to the wires that connect the bracket to the motherboard.
-
The two USB ports.
-
The LED activity lights.
-