Aggiusta la tua roba Comunità Store

Drill Master Heat Gun Power Cord Replacement

Introduzione

This is a simple repair for your heat gun that can be accomplished by any level of DIY skill. Just be sure to have the listed tools and, of course, don't have your heat gun plugged in.

Cosa ti serve

  1. Drill Master Heat Gun Power Cord Replacement, Power Cord: passo 1, immagine 1 di 1

    • Be sure the heat gun is unplugged before starting this process.

    • Remove the seven 14mm screws from the side of the drill using the PH#0 screwdriver.

    • You will need a screwdriver extension.

    Modifica

  2. Drill Master Heat Gun Power Cord Replacement: passo 2, immagine 1 di 1

    • Remove the 8mm screw from underside of barrel using the PH#0 screwdriver.

    • Don't try to open the casing just yet.

    Modifica

  3. Drill Master Heat Gun Power Cord Replacement: passo 3, immagine 1 di 3 Drill Master Heat Gun Power Cord Replacement: passo 3, immagine 2 di 3 Drill Master Heat Gun Power Cord Replacement: passo 3, immagine 3 di 3

    • Remove the barrel casing on either end by twisting and pulling each side off.

    Modifica

  5. Drill Master Heat Gun Power Cord Replacement: passo 4, immagine 1 di 1

    • Remove the top casing to reveal inside of drill. You might have to tug a little harder for this one.

    Modifica

  6. Drill Master Heat Gun Power Cord Replacement: passo 5, immagine 1 di 1

    • Loosen four screws on the wire connector using the flathead 2.5 screwdriver.

    • Screws do not come out of connector.

    Modifica

  7. Drill Master Heat Gun Power Cord Replacement: passo 6, immagine 1 di 1

    • Disconnect the power cord wiring from the wire connector.

    Modifica

  8. Drill Master Heat Gun Power Cord Replacement: passo 7, immagine 1 di 1

    • Remove the two 12mm screws from the base of power cord using the PH#0 screwdriver.

    Modifica

  9. Drill Master Heat Gun Power Cord Replacement: passo 8, immagine 1 di 1

    • Remove the power cord from the heat gun.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 655