Salta al contenuto principale

Dremel 8200 Disassembly

Cosa ti serve

  1. Dremel 8200 Disassembly, Dremel 8200 Disassembly: passo 1, immagine 1 di 2 Dremel 8200 Disassembly, Dremel 8200 Disassembly: passo 1, immagine 2 di 2
    • Take off the screw cap at the top

  2. Dremel 8200 Disassembly: passo 2, immagine 1 di 2 Dremel 8200 Disassembly: passo 2, immagine 2 di 2
    • Take out the battery

    • Remove oblong belt clip

  3. Dremel 8200 Disassembly: passo 4, immagine 1 di 1
    • Unscrew screws

    • Take back u clip out carefully

    • Be very careful to not injure yourself

  4. Dremel 8200 Disassembly: passo 6, immagine 1 di 2 Dremel 8200 Disassembly: passo 6, immagine 2 di 2
    • The casing should just open right up and be easily accessible

  5. Dremel 8200 Disassembly: passo 7, immagine 1 di 1
    • You can remove the buttons except for the sliding one that adjusts the speed

  6. Dremel 8200 Disassembly: passo 8, immagine 1 di 2 Dremel 8200 Disassembly: passo 8, immagine 2 di 2
    • You can take the motor out first and it will be a little hard to do so

    • Work your way down and take out each successive circuit board

    • The last thing to be out should be the sliding speed adjustment and the button for that should fall right out

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

2 Commenti

It will be handy to have either a can of compressed air or an air directional nozzle on your compressor. Be careful of the circuits and small parts that can blow away. You'll be amazed how even with a maintenance schedule, how much dirt will be on the motor fins

m. D. w. - Replica

How do you replace just the bearing in this assembly?

Andre Da Silva - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 31

Tutti i Tempi: 3,488