Aggiusta la tua roba Comunità Store

Display

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Display, key removal: passo 1, immagine 1 di 3 Display, key removal: passo 1, immagine 2 di 3 Display, key removal: passo 1, immagine 3 di 3

    • To get to the screws beneath the keyboard you need to take some keys off. You can use either an opening tool or an opening pick. The first picture shows how it should look like with all the necessary keys off (12 in total).

    • The four longer keys from the fingerboard are to be handled from the left side to get them off.

    • The eight smaller keys need to be levered from the bottom up.

    Traduci

  2. Display, removing scissors mechanisms: passo 2, immagine 1 di 2 Display, removing scissors mechanisms: passo 2, immagine 2 di 2

    • The scissor mechanism of the eight small keys are obstructing the underlying screws.

    • By using again an opening tool or opening pick these can be snapped off easily.

    • When reassembling be sure to place them in with the correct side facing upwards.

    Traduci

  4. Display, unscrew keyboard: passo 3, immagine 1 di 3 Display, unscrew keyboard: passo 3, immagine 2 di 3 Display, unscrew keyboard: passo 3, immagine 3 di 3

    • Loosen those 12 screws with a Phillips #00 screwdriver.

    • Then just pull off the four rotary knobs and the volume knob.

    • Now it is possible to slightly lift the keyboard and set it back.

    Traduci

  5. Display, unplug and remove keyboard: passo 4, immagine 1 di 1

    • Unlock the flex cables by pushing the two black nibs on both sides of each connector.

    • Now you can pull the flex cables out and remove the keyboard completely.

    Traduci

  6. Display, remove display: passo 5, immagine 1 di 3 Display, remove display: passo 5, immagine 2 di 3 Display, remove display: passo 5, immagine 3 di 3

    • Open the display cable connector by using a plastic opening tool to flip the latch upwards.

    • The display is held in place with a mild adhesive. A spudger helps you to get it free.

    • Now you can unplug the cable and take out the whole display.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Tobias Isakeit

Membro da: 03/31/14

117.802 Reputazione

188 Guide realizzate

Distintivi: 46

+43 altri distintivi

Team

Tobias Isakeit - Repairability Engineer Membro di Tobias Isakeit - Repairability Engineer

Business

1 Membro

1.083 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 158