Salta al contenuto principale

Introduzione

Dishwasher stopped washing. No pump sound. Display goes from Active to Clean in about 1 minute.

Strumenti

Parti

Nessuna parte specificata.

    • Cause: pump impeller blocked. .

    • Pump impellor blocked

    • Take out water with a cup or turkey baster and sponge.

    • Take out filter: left turn the cylindrical filter, take out the silver flat filter, drain water with sponge or turkey baster. Then remove white plastic part front/right by pulling out the long latch horizontally with pliers and then pull the plastic up.

    • That gives access to the impeller. Make sure it is not blocked. In my case there was a broken piece of glass that blocked it. Make sure it turns freely.. Replace everything - should work now.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Wolfgang

Membro da: 17/02/2012

521 Reputazione

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 44