Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Disassembling iRobot Roomba 551 Bottom Plate

Cosa ti serve

  1. Disassembling iRobot Roomba 551 Bottom Plate, Side Brush: passo 1, immagine 1 di 1
    • Place your Roomba upside-down on a hard surface.

  2. Disassembling iRobot Roomba 551 Bottom Plate: passo 2, immagine 1 di 1
    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

  3. Disassembling iRobot Roomba 551 Bottom Plate: passo 3, immagine 1 di 1
    • Gently pull upwards on the brush to remove it.

  4. Disassembling iRobot Roomba 551 Bottom Plate, Bottom Plate: passo 4, immagine 1 di 1
    • Rotate the Roomba upside-down so the bottom is facing towards you.

  5. Disassembling iRobot Roomba 551 Bottom Plate: passo 5, immagine 1 di 2 Disassembling iRobot Roomba 551 Bottom Plate: passo 5, immagine 2 di 2
    • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

  6. Disassembling iRobot Roomba 551 Bottom Plate: passo 6, immagine 1 di 1
    • Carefully lift the bottom plate.

    • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 13-14, Regan Winter 2014 Membro di Cal Poly, Team 13-14, Regan Winter 2014

CPSU-REGAN-W14S13G14

4 Membri

19 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 47

Tutti i Tempi: 2,250