Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Behold the iclicker in all its interactive and educational beauty.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the device on a flat surface, buttons facing down.
-
Remove the battery cover and the three batteries within.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two visible screws using a #00 Phillips screwdriver.
-
Oops! Don't forget a hidden third screw beneath the factory label.
-
Peel back the corner of the label to reveal the hidden screw.
-
If you wish to maintain the integrity of the label, a blowdryer may be used to soften the adhesive on the label before removal.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Depending on how much abuse your iclicker has endured, you might be able to separate the front and rear panels of the iclicker with your fingers.
-
For the more resistent iclickers, a spudger may be employed to separate the pieces.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Your iclicker is now exposed for all its worth.
-
The back panel can be set aisde, as the remaining components are housed in the front panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a spudger, gently pry the battery connectors from the front panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
If your circuit board is stuck in the front panel, use a spudger to lift the circuit board from the front panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The buttons can be easily removed from the front assembly sans spudger.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Don't lose the small LED cover sitting precariously in the front panel.
-