Salta al contenuto principale

Disassembling Speak And Spell Case

Cosa ti serve

  1. Disassembling Speak And Spell Case, Case: passo 1, immagine 1 di 2 Disassembling Speak And Spell Case, Case: passo 1, immagine 2 di 2
    • Flip the toy over, so that the keypad is facing away from you.

    • Remove two Phillips-head screws.

    • Insert a plastic spudger (or 4!) into the marked holes, and push down and towards the edge to release each catch.

    • It's possible to release each catch one-at-a-time, but easier if you have 4 tools and do them simultaneously.

    • This requires quite a bit of force; be careful.

  2. Disassembling Speak And Spell Case: passo 2, immagine 1 di 1
    • Separate the two halves of the case to expose the inner PCB, speaker and battery holder.

Conclusione

To reassemble your device, follow these instructions in reverse order.

bushing

Membro da: 04/23/10

10.244 Reputazione

13 Guide realizzate

Un commento

I got one of these. I've opened the case and the battery connections are silver and show no corrosion at all. I replaced the batteries, swapped out one of the Word Modules. I got a bit of static once, but now nothing. All the wire connection soldering looks fine. Any ideas?

stevehelium@gmail.com

Stephen Henderson - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 11

Tutti i Tempi: 4,947