Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Begin by placing the camera flat against a surface and remove the nine (9) black screws. Each screw is of the same length and can be used interchangeably
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool to carefully pry off the front casing.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the camera over 180 degrees and similarly pry off the rear casing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once the outer casings have been removed, the silver side trim should come loose from the camera.
-
Place the camera with the lens facing down. Use the plastic opening tool to pry off the side panel with the USB plug.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the camera with the lens facing down. Use the phillips head screwdriver to remove the silver screw in the corner near the photo capture button.
-
Flip the camera over. Use the plastic opening tool to detach the black clip near the capture button.
-
Grasp the top cover and gently remove it from the camera body.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.