Salta al contenuto principale

Disassembling Sony Clie PEG-NR70 The Case

Cosa ti serve

  1. Disassembling Sony Clie PEG-NR70 The Case, The Case: passo 1, immagine 1 di 1
    • Unscrew the 1.9mm screw located at the top of the device with a Phillips #00 screwdriver.

    • It may be helpful to set up a piece of paper to keep track of where removed screws came from.

  2. Disassembling Sony Clie PEG-NR70 The Case: passo 2, immagine 1 di 1
    • Unscrew the 2.5mm screw located on the left side of the device with a Phillips #00 screwdriver.

  3. Disassembling Sony Clie PEG-NR70 The Case: passo 3, immagine 1 di 2 Disassembling Sony Clie PEG-NR70 The Case: passo 3, immagine 2 di 2
    • Unscrew the five 2.5mm screws on the back panel with a Phillips #00 screwdriver.

    • Remove the back panel by lifting it away with your hands.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Daniel Soski

Membro da: 04/18/13

57 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 14-11, Maness Spring 2013 Membro di Cal Poly, Team 14-11, Maness Spring 2013

CPSU-MANESS-S13S14G11

5 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 7

Tutti i Tempi: 643