Salta al contenuto principale

Disassembling Sonos Play 1 Rear Housing Cover

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Disassembling Sonos Play 1 Rear Housing Cover, Disassembling Sonos Play 1 Rear Housing Cover: passo 1, immagine 1 di 2 Disassembling Sonos Play 1 Rear Housing Cover, Disassembling Sonos Play 1 Rear Housing Cover: passo 1, immagine 2 di 2
    • Using a plastic opening tool, remove the grey tape from both sides of the device.

  2. Disassembling Sonos Play 1 Rear Housing Cover: passo 2, immagine 1 di 2 Disassembling Sonos Play 1 Rear Housing Cover: passo 2, immagine 2 di 2
    • Remove the six 9 mm Torx #9 screws.

    • Using a plastic opening tool, detach the rear housing cover from the housing.

    • Try not to jerk the rear housing cover, as its wires are still connected to delicate electronics.

  3. Disassembling Sonos Play 1 Rear Housing Cover: passo 3, immagine 1 di 2 Disassembling Sonos Play 1 Rear Housing Cover: passo 3, immagine 2 di 2
    • Using tweezers, grip the connector fixed to the motherboard's audio cable.

    • While pulling on the connector, detach the cable by pressing the connectors release.

  4. Disassembling Sonos Play 1 Rear Housing Cover: passo 4, immagine 1 di 1
    • Using your fingers, grip the connector fixed to the motherboards power cable and detach it.

    • You will now be able to remove the rear housing cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 8-4, Eyestone Fall 2015 Membro di USF Tampa, Team 8-4, Eyestone Fall 2015

USFT-EYESTONE-F15S8G4

4 Membri

16 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 105