Pericolo
Potenzialmente Pericoloso
Possibilità di infortunio se questa procedura non viene seguita correttamente. Prestare attenzione e seguire tutte le avvertenze.
Pericolo

Introduzione

My autofocus bearings were stopped, I could focus only between min to 0.5m. This will show how to reach a part which moves the lens and makes it to zoom and focus.

Done by Rimvydas Gudeliauskas

Strumenti

Parti

Nessuna parte richiesta.

  1. Take the lens away from camera
    • Take the lens away from camera

    • DO NOT FORGET: THAT YOU ARE DOING ALL ON YOUR OWN RESPONSIBILITY

    Aggiungi Commento

  2. Unscrew the top part and detach it.
    • Unscrew the top part and detach it.

    • Unjoin cables. Be careful; they're delicate, and easily torn.

      • Try to avoid contact with the sensitive electronic components.

    • Unfasten the screws that hold the circuit board in place, and separate it from the rest of the lens assembly.

    Aggiungi Commento

    • Take away zoom rubber and you will find srews

    Aggiungi Commento

    • Just take parts you need until you reach what you want to fix

    • Zoom bearing can be taken away by unscrewing its srews.

    Aggiungi Commento

    • Here is one of the parts which was broken, so I go to camera repair shop, and bought that parts. As this was not the only part broken, I had to leave for additional repair.

    • When you finish you can put all back together

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Rimvydas

Membro da: 29/03/2012

296 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 28

Ultimi 30 Giorni: 136

Tutti i Tempi: 24,623