Salta al contenuto principale

Disassembling Samsung HMX-W300

Cosa ti serve

  1. Disassembling Samsung HMX-W300, Disassembling Samsung HMX-W300: passo 1, immagine 1 di 3 Disassembling Samsung HMX-W300, Disassembling Samsung HMX-W300: passo 1, immagine 2 di 3 Disassembling Samsung HMX-W300, Disassembling Samsung HMX-W300: passo 1, immagine 3 di 3
    • To remove the wristband of the device, grab the middle loop and pull the band through.

  2. Disassembling Samsung HMX-W300: passo 2, immagine 1 di 2 Disassembling Samsung HMX-W300: passo 2, immagine 2 di 2
    • Remove four screws with a Hex 1.5 mm screwdriver.

  3. Disassembling Samsung HMX-W300: passo 3, immagine 1 di 3 Disassembling Samsung HMX-W300: passo 3, immagine 2 di 3 Disassembling Samsung HMX-W300: passo 3, immagine 3 di 3
    • Open the HDMI door on the side of the camera.

    • Remove the single screw using a Phillips #00 screwdriver.

  4. Disassembling Samsung HMX-W300: passo 4, immagine 1 di 3 Disassembling Samsung HMX-W300: passo 4, immagine 2 di 3 Disassembling Samsung HMX-W300: passo 4, immagine 3 di 3
    • Use the iFixit opening tool on both sides on the device. Pry apart both sections with light force.

    • Do not apply too much force. There is a wire that attaches the front case with the rear case that can be damaged.

  5. Disassembling Samsung HMX-W300: passo 5, immagine 1 di 3 Disassembling Samsung HMX-W300: passo 5, immagine 2 di 3 Disassembling Samsung HMX-W300: passo 5, immagine 3 di 3
    • Pull the wire ribbon out with a pair of tweezers.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Robert

Membro da: 01/21/15

966 Reputazione

8 Guide realizzate

Team

USF Tampa, Team 9-2, Blackwell Winter 2015 Membro di USF Tampa, Team 9-2, Blackwell Winter 2015

USFT-BLACKWELL-W15S9G2

4 Membri

16 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 7

Tutti i Tempi: 753