Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
-
Tirare il fermo esterno.
-
Abbassare lo sportello fino a quando non è all'altezza della superficie di lavoro.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Removing the faceplate.
-
On the inside of the case, find the two plastic tabs.
-
While depressing the tabs, remove the faceplate by pulling and rotating outward.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws on the front of the drive with the Phillips #1 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the drive out to allow access to the power and ribbon cables. Do not fully remove.
-
Remove both the power and ribbon cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove DVD drive from the drive bay.
-
Lift the two metal tabs on the back of the shielding and remove.
-
Remove the four screws on the bottom of the drive with the Phillips #1 screwdriver.
-
Slide out DVD drive.
-
Annulla: non ho completato questa guida.
Altre 11 persone hanno completato questa guida.