Salta al contenuto principale

Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide)

Cosa ti serve

Panoramica Video

  1. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Case Separation: passo 1, immagine 1 di 2 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Case Separation: passo 1, immagine 2 di 2
    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

  2. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 2, immagine 1 di 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 2, immagine 2 di 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 2, immagine 3 di 3
    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

  3. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 3, immagine 1 di 2 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 3, immagine 2 di 2
    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

  4. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 4, immagine 1 di 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 4, immagine 2 di 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 4, immagine 3 di 3
    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

  5. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 5, immagine 1 di 2 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 5, immagine 2 di 2
    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

  6. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 6, immagine 1 di 1
    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

  7. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 7, immagine 1 di 1
    • Free the battery cable by gently prying up on the connection with a spudger.

  8. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 8, immagine 1 di 1
    • Separate the front and rear cases.

  9. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Battery: passo 9, immagine 1 di 2 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Battery: passo 9, immagine 2 di 2
    • With the help of a spudger, gently pry off and remove the battery cable retainer on the back casing assembly.

    • The easiest access to the battery cable retainer is where the battery cable comes out.

    • You can also use the two small tabs on the side of the cable retainer. Locate the tabs and release one at a time. Be a little careful not to push the cover in and re-lock it.

  10. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 10, immagine 1 di 2 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 10, immagine 2 di 2
    • Using a Phillips #00 screwdriver, remove the two 5.0mm blue battery case screws.

    • Remove the plastic battery retaining bar.

  11. Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 11, immagine 1 di 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 11, immagine 2 di 3 Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): passo 11, immagine 3 di 3
    • Using your finger or a spudger, lift the battery out and remove it.

    • Guide the battery wires through the hole in the back casing as you remove the battery.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

djgodmandj

Membro da: 10/24/14

284 Reputazione

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 33

Tutti i Tempi: 5,645