Introduzione
This guide is a prerequisite guide to enable access to features under the top casing for maintenance, repair, and replacement. The top cover encases the top features of the device except the flash and shutter button.
Cosa ti serve
-
-
Using the J0 screwdriver, remove the 6.3 mm screw.
-
-
-
-
Remove the 6.3 mm screw using a J0 screwdriver.
-
-
-
With the top of the camera facing down, remove the 3.4 mm screw with a J0 screwdriver.
-
-
-
Gently pull off the top cover with your hands by pulling on the tab on the left of the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.