1. Remove the four rubber screw covers from encircled locations.
    • Remove the four rubber screw covers from encircled locations.

    • Using a #0 tri wing screwdriver, remove the screws previously hidden below the rubber covers.

    • If you have difficulties finding this screwdriver, it is commonly sold as a Nintendo Gameboy/Wii screwdriver.

  2. Pry the case open using iPhone tool (as shown), fingernails, small flathead screwdriver, etc.
    • Pry the case open using iPhone tool (as shown), fingernails, small flathead screwdriver, etc.

    • Be mindful of location and magnitude of applied force, so as not to damage the case.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Unlock the minor LCD connector by applying bilateral pressure with tweezers, as shown.
    • Unlock the minor LCD connector by applying bilateral pressure with tweezers, as shown.

  5. Use fingernails to pry off minor LCD mount, as shown.
    • Use fingernails to pry off minor LCD mount, as shown.

    • Remove the minor LCD

Conclusione

To reassemble your device, follow these instructions in reverse order.

Van

Membro da: 24/06/2010

7 Reputazione

8 Guide realizzate

Team

Cal Poly, Team 2-10, Johann Summer 2010 Membro di Cal Poly, Team 2-10, Johann Summer 2010

CPSU-JOHANN-R10S2G10

4 Membri

20 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,274