Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use two or three fingers slowly pull the cushion.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
By feel, locate 4 screws under the foam, 2 each side.
-
Scrap away just sufficient foam in order to be able to remove the screws, and remove them.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The speaker assembly is now held in the shell just be a number of tabs around the edges. Gently prise it out from these tabs and remove it.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
On the right side connection are made via a small printed circuit board. Remove 2 screws in order to remove this for re-soldering or replacement of any of the wires.
-
Right: Red
-
Left: Green
-
Common (Ground): Gold.
-
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.
Un commento
Hola Buenas, gracias por las fotos y la información. Te quiero hacer una consulta por si me puedes ayudar, quiero instalar un circuito de Bluetooth a los cascos, lo pondría entre el cable de salida del jack y el circuito verde? Supongo que el circuito sirve para unir los cables de ambos altavoces en una sola salida.
Muchas gracias de antemano