Parti

Nessuna parte richiesta.

Flip over the turntable and remove the nine screws on the outer edges.
  • Flip over the turntable and remove the nine screws on the outer edges.

Aggiungi Commento

Remove the back cover by pulling it apart.
  • Remove the back cover by pulling it apart.

Aggiungi Commento

  • Locate the largest circuit board inside the device.

Aggiungi Commento

  • Locate the wires that are plugged into the side of the circuit board.

Aggiungi Commento

  • Gently pull out the wires plugged into the circuit board.

Aggiungi Commento

  • Once the wires are unplugged you will notice two more wires plugged into the bottom of the circuit board.

  • Note that these wires are soldered onto the circuit, indicated by the red markers.

  • To completely remove the circuit board these wires must be removed.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Sukhjinder

Membro da: 12/10/2011

11 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 17-14, Regan Fall 2011 Membro di Cal Poly, Team 17-14, Regan Fall 2011

CPSU-REGAN-F11S17G14

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 946