Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Disassembling Nokia 3560 LCD Display

Scritto Da: Sam Ryan (e 5 altri collaboratori)
  • Commenti: 0
  • Preferiti: 0

Difficoltà

Facile

Passi

7

Tempo Necessario

5 - 10 minuti

Sezioni

3

Contrassegni

2

Missing Prerequisites

Prerequisite Mancanti

A questa guida mancano informazioni su come avviare la procedura. Fai una guida prerequisita!

Incorrect Tools

Attrezzi Non Corretti

Contribuisci a rendere migliore questa guida usando i giusti strumenti nelle immagini e/o nel testo.

Introduzione

This guide will show you how to remove the LCD Display from the Nokia 3560.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte specificata.

  1. Press down on the release latch on the bottom of the cover. Once the latch is released, lift the cover from the phone.

    • Press down on the release latch on the bottom of the cover.

    • Once the latch is released, lift the cover from the phone.

    Modifica

  2. Lift the front case off of the phone body.

    • Lift the front case off of the phone body.

    Modifica

  3. Lift the keypad off of the phone. Lift the keypad off of the phone.

    • Lift the keypad off of the phone.

    Modifica

  4. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

  5. The screen is held to the body by six screws.

    • The screen is held to the body by six screws.

    Modifica

  6. Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

    • Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

    Modifica

  7. Insert a flat screwdriver between the black body and plastic layer. Insert a flat screwdriver between the black body and plastic layer.

    • Insert a flat screwdriver between the black body and plastic layer.

    Modifica

  8. Pry the layers apart. The LCD and plastic layer will lift out as one piece.

    • Pry the layers apart. The LCD and plastic layer will lift out as one piece.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Sam Ryan

Membro da: 18/04/2010

1 Reputazione

8 Guide realizzate

Distintivi: 5

+2 altri distintivi

Team

Cal Poly, Team 30-39, Garner Spring 2010 Membro di Cal Poly, Team 30-39, Garner Spring 2010

CPSU-GARNER-S10S30G39

5 Membri

16 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 1,903