Introduzione

This guide shows you how to remove the front cover of the phone so that you can access the internal components found there.

Parti

Nessuna parte richiesta.

  1. Turn off the phone.
    • Turn off the phone.

    • Position the phone so that the back side is in view.

    Aggiungi Commento

  2. Apply pressure on the cover while simultaneously sliding the cover downward.
    • Apply pressure on the cover while simultaneously sliding the cover downward.

    • Remove the back battery cover.

    Aggiungi Commento

    • Insert the spudger between the base of the phone and the phone battery.

    • Position the phone so that the battery won't fall out of the phone.

    • Carefully lift the battery out of the phone.

      • The battery lifts out of the phone easily.

    Aggiungi Commento

    • Keep the phone closed.

    • Hold the phones sideways with the front cover of the phone facing up.

    Aggiungi Commento

    • Find the slight crease on the side that divides the display assembly in half.

    • Slowly wedge the spudger into the crease.

      • It's a little difficult to perform this step because the crease is narrow. Do not rush because you may damage the phone

    Aggiungi Commento

    • Run the spudger all along the crease while lifting up.

    • Separate the front cover from the front base.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Kristen

Membro da: 17/01/2011

175 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 1-14, Amido Winter 2011 Membro di Cal Poly, Team 1-14, Amido Winter 2011

CPSU-AMIDO-W11S1G14

5 Membri

16 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,069