Salta al contenuto principale

Parti

Nessuna parte specificata.

  1. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera.
    • Remove the screws from the bottom, right, and left side of camera.

  2. Remove the back of the camera, this may require force.
    • Remove the back of the camera, this may require force.

  3. Unscrew the right metal bracket of the viewing lens
    • Unscrew the right metal bracket of the viewing lens

  4. Unscrew the top right corner screw
    • Unscrew the top right corner screw

  5. Unscrew the bottom right corner screw.
    • Unscrew the bottom right corner screw.

  6. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
    • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

  7. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  8. Pull the front of the camera off of the mother board. Pull the front of the camera off of the mother board.
    • Pull the front of the camera off of the mother board.

  9. Unscrew the grey plastic around the screen
    • Unscrew the grey plastic around the screen

  10. Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.
    • Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.

  11. Maneuver to detach the flash bulb.
    • Maneuver to detach the flash bulb.

  12. Unscrew the metal bracket under the lens
    • Unscrew the metal bracket under the lens

  13. Slide the plastic bracket through the metal bracket.
    • Slide the plastic bracket through the metal bracket.

    • Remove the orange cable from the motherboard.

  14. Pull the black tape off.
    • Pull the black tape off.

  15. Unscrew the two screws underneath.
    • Unscrew the two screws underneath.

    • Remove lens

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Crista Riedy

Membro da: 12/02/2013

406 Reputazione

3 Guide realizzate

Team

Ohio State, Team 1-2, Buehl Spring 2013 Membro di Ohio State, Team 1-2, Buehl Spring 2013

OSU-BUEHL-S13S1G2

2 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 529