1. Place the monitor face down on a clean, flat surface.
    • Place the monitor face down on a clean, flat surface.

    Aggiungi Commento

  2. Firmly remove the back panel of the stand by pulling it up and away from the monitor.
    • Firmly remove the back panel of the stand by pulling it up and away from the monitor.

    Aggiungi Commento

    • Unscrew the two 6mm Phillips PH2 screws to detach the stand enclosure from the stand.

    Aggiungi Commento

    • Firmly grasp the stand enclosure with your hand and slide it to base of stand.

    Aggiungi Commento

    • Unscrew the two 14.5mm Phillips PH2 screws holding the stand to the monitor.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Lift the the stand straight up to remove it.

    Aggiungi Commento

    • Place the monitor screen face up.

    • Pull the frame off by placing your fingers on the inside of the frame and pulling out and up, the frame should snap off.

    • Continue your way around the screen.

    Aggiungi Commento

    • Unscrew the two 7mm screws from the bottom of the button assembly.

    • Do not pull the button assembly out too quickly or with too much force! Damage to the wires can occur.

    • Pull the button assembly out a few inches and unplug the colored cables.

    Aggiungi Commento

    • Unscrew the gold colored 7mm Phillips PH000 screw holding the button assembly to the monitor.

    • Remove the button assembly from the monitor.

    Aggiungi Commento

    • With the monitor face-down, unscrew the 5 7mm Phillips PH2 screws around the outside of the enclosure.

    Aggiungi Commento

    • Unscrew the 2 14.5mm Phillips PH2 screws located on the raised center of the enclosure.

    • Carefully pull the enclosure off the monitor.

    Aggiungi Commento

    • Unscrew the 10 5mm Philips PH2 screws holding the metal casing to the monitor.

    Aggiungi Commento

    • Pull the the metal casing off of the monitor to reveal the motherboards.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

John Patterson

Membro da: 19/10/2013

217 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 11-36, Amido Fall 2013 Membro di Cal Poly, Team 11-36, Amido Fall 2013

CPSU-AMIDO-F13S11G36

5 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 46

Tutti i Tempi: 2,985