Introduzione

The removal and replacement of the LCD board.

  1. Open the flip cover of the phone with the LCD screen facing towards you.
    • Open the flip cover of the phone with the LCD screen facing towards you.

    Aggiungi Commento

  2. Use a Razor Blade to remove the screw covers.
    • Use a Razor Blade to remove the screw covers.

    • Razor Blade is very sharp. Use caution.

    Aggiungi Commento

    • Unscrew the screws using a Phillips #00 Screwdriver.

    Aggiungi Commento

    • Insert a Spudger into the side crack of the flip cover and slowly separate the phone cover from the case.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Gently separate the flip cover case from the phone with your hands when the crack is wide enough.

    Aggiungi Commento

    • Partially close the flip cover of the phone in order to take off the outer case.

    Aggiungi Commento

    • Completely remove the outer casing from the phone.

    Aggiungi Commento

    • Place your thumb underneath the protective metal covering to remove it from the phone.

    Aggiungi Commento

    • Gently detach the black microchip from the phone with a Tweezer.

    Aggiungi Commento

    • Prop out the LCD board from the phone using your fingertips.

    Aggiungi Commento

    • Remove the LCD board from the phone by grabbing the bottom side of the LCD board.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Andrew Aw

Membro da: 08/04/2010

1 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 34-56, Forte Spring 2010 Membro di Cal Poly, Team 34-56, Forte Spring 2010

CPSU-FORTE-S10S34G56

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,282