Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Disassembling Logitech MBJ58 Mouse Scroll wheel from mount

Introduzione

You will learn how to remove the scroll wheel from mount.

Cosa ti serve

  1. Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Top cover: passo 1, immagine 1 di 1

    • Hold the mouse so that the bottom is facing up.

    • Remove the single Phillips #1 screw from the bottom half of the mouse.

    Traduci

  2. Disassembling Logitech MBJ58 Mouse Scroll wheel from mount: passo 2, immagine 1 di 2 Disassembling Logitech MBJ58 Mouse Scroll wheel from mount: passo 2, immagine 2 di 2

    • Place the mouse so that the bottom is resting against a hard surface.

    • Lift the top cover of the mouse gently, and remove it.

    Traduci

  4. Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Removing the Logitech MBJ58 Mouse Scroll Wheel: passo 3, immagine 1 di 3 Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Removing the Logitech MBJ58 Mouse Scroll Wheel: passo 3, immagine 2 di 3 Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Removing the Logitech MBJ58 Mouse Scroll Wheel: passo 3, immagine 3 di 3

    • Locate the scroll wheel on the mouse.

    • Grab the scroll wheel with your thumb and index finger.

    • Gently lift up, to remove the scroll wheel from the mouse.

    Traduci

  5. Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Support Spring: passo 4, immagine 1 di 2 Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Support Spring: passo 4, immagine 2 di 2

    • Locate the spring on the scroll wheel, and carefully remove the spring.

    Traduci

  6. Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Attaching the New Spring: passo 5, immagine 1 di 2 Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Attaching the New Spring: passo 5, immagine 2 di 2

    • Place the replacement spring on the correct side of the wheel (shown in the images) with the prongs pointing down.

    Traduci

  7. Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Disassembling Logitech MBJ58 Mouse Scroll wheel from mount: passo 6, immagine 1 di 3 Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Disassembling Logitech MBJ58 Mouse Scroll wheel from mount: passo 6, immagine 2 di 3 Disassembling Logitech MBJ58 Mouse Scroll wheel from mount, Disassembling Logitech MBJ58 Mouse Scroll wheel from mount: passo 6, immagine 3 di 3

    • Use the images to locate where the resistance spring is.

    • This spring will easily fall off.

    • Grab the scroll wheel and its mount and gently pull them apart.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 14 persone hanno completato questa guida.

Autore

con 11 altri collaboratori

Maximilian Betkowski

Membro da: 01/11/13

235 Reputazione

4 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

Cal Poly, Team 5-14, Forte Winter 2013 Membro di Cal Poly, Team 5-14, Forte Winter 2013

CPSU-FORTE-W13S5G14

5 Membri

21 Guide realizzate

7 Commenti

Excellent! I took an MBJ58 apart to remove accumulated gunk, and the resistance spring jumped onto my worktable before I noticed where it came from. Thanks for the help, well done!

Marty Swartz - Replica

Heh, me too. Couldn't for the life of me figure out how it went back in. Thanks for the guide!

Steve Bennett - Replica

Same thing happened to me...saved me a trip to the store for a new mouse!!

thanks for taking the time to post these photos!

Bill McFarland - Replica

huh, thank you very much, amazing guide, the only for this product in Internet , and amazingly accurate

leartzajmi - Replica

the resistence spring falled off on mine how do i out it back on help

Tay Carr - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 51

Tutti i Tempi: 7,131