Salta al contenuto principale

Introduzione

This tutorial demonstrates how to remove the back cover from the camera

Ricambi

Nessuna parte specificata.

  1. Disassembling Kodak Easyshare C813 Back Cover, Battery: passo 1, immagine 1 di 1
    • Turn off camera by firmly pressing the power button that is located on the top of the camera near the selector dial.

  2. Disassembling Kodak Easyshare C813 Back Cover: passo 2, immagine 1 di 3 Disassembling Kodak Easyshare C813 Back Cover: passo 2, immagine 2 di 3 Disassembling Kodak Easyshare C813 Back Cover: passo 2, immagine 3 di 3
    • Press thumb firmly on battery door and slide it in the direction of the arrow.

    • Lift thumb allowing the door to swing open.

  3. Disassembling Kodak Easyshare C813 Back Cover, Back Cover: passo 3, immagine 1 di 1
    • Before removing back cover, it is advisable to use an anti-static wrist strap to prevent damage to electronics.

  4. Disassembling Kodak Easyshare C813 Back Cover: passo 4, immagine 1 di 1
    • Turn the camera off by firmly pressing the power button located on top of the camera.

  5. Disassembling Kodak Easyshare C813 Back Cover: passo 5, immagine 1 di 3 Disassembling Kodak Easyshare C813 Back Cover: passo 5, immagine 2 di 3 Disassembling Kodak Easyshare C813 Back Cover: passo 5, immagine 3 di 3
    • Locate the 7 screws holding the back cover on.

    • Three screws are located on the bottom of the camera.

    • Two screws are located on the side shown in the photograph.

    • Two final screws are located on the opposite side shown in the photograph.

    • Remove all 7 screws:

    • Hold the camera firmly with one hand so that you can still see a screw.

    • Place the Philips 00(Found here)screwdriver into the screw.

    • Turn the screwdriver to the left until it is free.

    • Repeat for the remaining screws.

  6. Disassembling Kodak Easyshare C813 Back Cover: passo 7, immagine 1 di 3 Disassembling Kodak Easyshare C813 Back Cover: passo 7, immagine 2 di 3 Disassembling Kodak Easyshare C813 Back Cover: passo 7, immagine 3 di 3
    • Use plastic opening tools to slightly open the side of the case.

    • Insert a plastic opening tool and apply pressure to the internal three tabs at the top.

    • The first two are near the words "3X Optical Zoom".

    • The third is near the shutter button.

  7. Disassembling Kodak Easyshare C813 Back Cover: passo 8, immagine 1 di 3 Disassembling Kodak Easyshare C813 Back Cover: passo 8, immagine 2 di 3 Disassembling Kodak Easyshare C813 Back Cover: passo 8, immagine 3 di 3
    • Gently pull apart the back cover from the rest of the camera.

    • Make sure there are no more screws or tabs keeping the cover on.

    • Use the plastic opening tool to separate any sides still closely connected.

Linea Traguardo

Un'altra persona ha completato questa guida.

Susan Marano

Membro da: 15/04/2010

318 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 24-22, Regan Spring 2010 Membro di Cal Poly, Team 24-22, Regan Spring 2010

CPSU-REGAN-S10S24G22

4 Membri

20 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 16

Tutti i Tempi: 2,269