Introduzione

These instructions will demonstrate how to remove the camera from the KDDI Kyocera A5521K.

  1. Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.
    • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

      • Beneath the covers are screws.

  2. Remove the screws using a Y0 screwdriver.
    • Remove the screws using a Y0 screwdriver.

    • Use the iPod pry tool to remove the outer screen.

      • Two screws are now visible.

      • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

    • Use the Y0 screwdriver to remove the screws.

    • Use the iPod pry tool to loosen the faceplate from the phone.

      • Slide the pry tool along the entire crease of the faceplate to completely detach it.

    • Separate the faceplate from the phone.

    • Firmly grab the flexible circuit with tweezers to detach (or use your fingers if you can manage a firm grip).

    • Carefully pry up the camera unit with a spudger.

      • Be careful not to damage the camera unit.

      • The camera should now be separated from the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

Membro da: 15/04/2010

157 Reputazione

10 Guide realizzate

Team

Cal Poly, Team 28-25, Regan Spring 2010 Membro di Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Membri

20 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,410