Introduzione

These instructions will demonstrate how to remove the back plate from the KDDI Kyocera A5521K.

Parti

Nessuna parte richiesta.

  1. Turn the phone over to expose the battery cover.
    • Turn the phone over to expose the battery cover.

    • Apply pressure to the back of the battery cover to slide it down.

    • The battery cover is now separate from the phone.

    Aggiungi Commento

  2. Remove the battery by pushing it up and out from the bottom.
    • Remove the battery by pushing it up and out from the bottom.

    • The battery, cover, and phone should now be separated.

    Aggiungi Commento

    • Remove the four screws with the Y0 screwdriver.

    Aggiungi Commento

    • Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws.

    • Remove the two screws with a Y0 screwdriver.

    Aggiungi Commento

    • Rotate the phone 180 degrees.

    • Carefully separate the back plate from the remainder of the phone.

    • The back plate should now be detached from the rest of the phone.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Dominic Grisafe

Membro da: 15/04/2010

157 Reputazione

10 Guide realizzate

Team

Cal Poly, Team 28-25, Regan Spring 2010 Membro di Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Membri

20 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,659