Salta al contenuto principale

Parti

Nessuna parte specificata.

  1. Open the LCD screen and remove 2 hinge screws. Remove hinge cover. Shut screen when finished.
    • Open the LCD screen and remove 2 hinge screws.

    • Remove hinge cover. Shut screen when finished.

  2. Remove 5 screws on bottom panel of camera. Push the eject button on the bottom panel to open the cassette cover. Shut cassette cover when finished.
    • Remove 5 screws on bottom panel of camera.

    • Push the eject button on the bottom panel to open the cassette cover.

    • Shut cassette cover when finished.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Open LCD screen and move dark gray tab near eyepiece aside.
    • Open LCD screen and move dark gray tab near eyepiece aside.

    • Remove screw under dark gray tab on LCD screen side of camera.

  5. Remove 2 screws on side opposite LCD screen.
    • Remove 2 screws on side opposite LCD screen.

  6. Place plastic opening tool under seam of camera top cover and unsnap cover. Gently pry top cover from camera base.
    • Place plastic opening tool under seam of camera top cover and unsnap cover.

    • Gently pry top cover from camera base.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

justin chen

Membro da: 27/04/2010

47 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 18-69, Johann Spring 2010 Membro di Cal Poly, Team 18-69, Johann Spring 2010

CPSU-JOHANN-S10S18G69

4 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 2,991