Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
The lower bracket needs to be removed to get to some components of the laptop.
Cosa ti serve
-
-
Using a Phillips #0 screwdriver, identify and unscrew the twenty screws located on the underside of the T42.
-
-
-
Unscrew the four Phillips screws located on either side of the rear of the T42 (there are two located on each end.)
-
-
-
-
Flip the laptop over and open the screen to access the keyboard and trackpad.
-
-
-
The metal bracket will now be free to move, grasp it and remove it from the device.
-
-
-
Remove the small rubber piece that is covering the T42's microphone,
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.