Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Be sure to remove the ink-cartridges and unplug the printer before beginning dis assembly of the device.
Cosa ti serve
-
-
Rotate the printer 90 degrees counter clockwise so that the side panel next to control panel is facing you.
-
Remove the two T10 12mm Torx screws from the left side panel.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 11 persone hanno completato questa guida.