Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Disassembling HP Mini 110-1046NR Memory Card Cover

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Disassembling HP Mini 110-1046NR Memory Card Cover, Battery: passo 1, immagine 1 di 3 Disassembling HP Mini 110-1046NR Memory Card Cover, Battery: passo 1, immagine 2 di 3 Disassembling HP Mini 110-1046NR Memory Card Cover, Battery: passo 1, immagine 3 di 3
    • Power-off the netbook fully before attempting to remove the battery.

    • Flip your netbook upside down, and locate the sliding tabs near the battery.

    • Slide both tabs inward so that the battery visibly moves away from the case of the computer.

    • Release the tabs and pull the battery out.

  2. Disassembling HP Mini 110-1046NR Memory Card Cover, Memory Card Cover: passo 2, immagine 1 di 3 Disassembling HP Mini 110-1046NR Memory Card Cover, Memory Card Cover: passo 2, immagine 2 di 3 Disassembling HP Mini 110-1046NR Memory Card Cover, Memory Card Cover: passo 2, immagine 3 di 3
    • Flip the netbook over so you are looking at the bottom, and locate the two screws that hold the memory card cover.

    • Next, take a Phillips PH1 screwdriver and unscrew the two screws.

    • These screws will not release from the cover once they are unscrewed.

    • If necessary, use the flat end of the spudger to assist in prying the cover away from the computer.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jared Cooper

Membro da: 10/18/13

649 Reputazione

5 Guide realizzate

Team

Clemson, Team 14-1, Benson Fall 2013 Membro di Clemson, Team 14-1, Benson Fall 2013

CLEM-BENSON-F13S14G1

3 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 10

Tutti i Tempi: 65