Introduction

Removing the outer case of the camera.

Parts

No parts required.

  1. Remove the batteries from the camera to prevent danger of electric shock.
    • Remove the batteries from the camera to prevent danger of electric shock.

    Add Comment

  2. Locate all five screws on the camera. Then proceed to remove all the screws.
    • Locate all five screws on the camera. Then proceed to remove all the screws.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Beware, if your screwdriver does not fit properly, you may damage the screws' heads.

    • If your screwdriver does not fit, or you do not have the proper one, you can use a hot glue gun to fix the screwdriver to the head of the screw. Wait for it to harden slightly, and then try to remove the screws.

    Add Comment

    • Remove outer case. Pull the back away from the main body of the camera.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cody

Member since: 04/18/2010

47 Reputation

4 Guides authored

Team

Cal Poly, Team 7-11, Maness Spring 2010 Member of Cal Poly, Team 7-11, Maness Spring 2010

CPSU-MANESS-S10S7G11

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 3,395