Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove metal sticker under the LCD screen with a spudger.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 4 gray screw caps with the spudger. These cover the screw heads and protect from dirt or grime.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 5 10mm screws with the #00 Phillips screwdriver. These connect the back of the outer shell to the front of the outer shell.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open battery door. This can be done by gently depressing and sliding the battery down downward.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the spudger to separate outer shells.
-
The spudger must be inserted between the shell halves to pry the edges apart.
-
Slowly work around the outside to separate the halves.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.