Salta al contenuto principale

Disassembling Flip Video Outer Shell

Cosa ti serve

  1. Disassembling Flip Video Outer Shell, Outer Shell: passo 1, immagine 1 di 2 Disassembling Flip Video Outer Shell, Outer Shell: passo 1, immagine 2 di 2
    • Turn off the device and take the batteries out.

    • Remove metal sticker under the LCD screen with a spudger.

    • This may require a large force to pry off the glued sticker.

  2. Disassembling Flip Video Outer Shell: passo 2, immagine 1 di 1
    • Remove the 4 gray screw caps with the spudger. These cover the screw heads and protect from dirt or grime.

  3. Disassembling Flip Video Outer Shell: passo 3, immagine 1 di 2 Disassembling Flip Video Outer Shell: passo 3, immagine 2 di 2
    • Remove the 5 10mm screws with the #00 Phillips screwdriver. These connect the back of the outer shell to the front of the outer shell.

  4. Disassembling Flip Video Outer Shell: passo 4, immagine 1 di 1
    • Open battery door. This can be done by gently depressing and sliding the battery down downward.

  5. Disassembling Flip Video Outer Shell: passo 5, immagine 1 di 1
    • Use the spudger to separate outer shells.

    • The spudger must be inserted between the shell halves to pry the edges apart.

    • Slowly work around the outside to separate the halves.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Elizabeth

Membro da: 04/15/10

100 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 26-21, Regan Spring 2010 Membro di Cal Poly, Team 26-21, Regan Spring 2010

CPSU-REGAN-S10S26G21

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 2,020