Disassembling DualShock 4 Controller - Guida di riparazione iFixit

Cosa ti serve

Passo 1 Controller

Disassembling DualShock 4 Controller, Controller: passo 1, immagine 1 di 1

Using the Phillips #00 Screwdriver, remove the four 6.0 mm screws securing the rear cover to the controller.
Do not forcefully loosen the screws, as it will amount to permanent damage of the threads, making removal impossible.

Passo 2

Disassembling DualShock 4 Controller: passo 2, immagine 1 di 3

Disassembling DualShock 4 Controller: passo 2, immagine 2 di 3

Disassembling DualShock 4 Controller: passo 2, immagine 3 di 3

Beginning with the left handle:
Pinch the left handle of the controller to introduce an opening.
Wedge a plastic opening tool into the opening and slide it up towards the joystick.
Pull down on the plier to crack open the casing.
Repeat these steps for the right handle.

Passo 3

Disassembling DualShock 4 Controller: passo 3, immagine 1 di 3

Disassembling DualShock 4 Controller: passo 3, immagine 2 di 3

Disassembling DualShock 4 Controller: passo 3, immagine 3 di 3

Wedge a plastic opening tool into the case-splittings and pull down to crack open the casing near the following buttons:
Share button
Options button
Split the plastic covers of the controller apart, taking note that they will still be attached by circuit board ribbons.
Three small pieces are often released from the framework. To prevent loss, maintain a controlled work field.
2 Trigger Springs
1 Grey Reset Button Extension

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 7 altri collaboratori

Mark

Membro da: 01/21/14

7.719 Reputazione

7 Guide realizzate

+14 altri distintivi

Team

Cal Poly, Team 6-21, Maness Winter 2014 Membro di Cal Poly, Team 6-21, Maness Winter 2014

CPSU-MANESS-W14S6G21

4 Membri

40 Guide realizzate

0 Commenti

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,243