Aggiusta la tua roba Comunità Store

Disassembling Coby Kyros MID9742 Outer Casing

Introduzione

This process is simple and when completed will allow the user to service the components that are located in the interior of the tablet.

Cosa ti serve

  1. Disassembling Coby Kyros MID9742 Outer Casing, Outer Casing: passo 1, immagine 1 di 1

    • Use a spudger to remove the four rubber screw covers from the four back corners of the tablet.

    Modifica

  3. Disassembling Coby Kyros MID9742 Outer Casing: passo 2, immagine 1 di 1

    • Place the PH00 screwdriver and use it to remove the four 0.5 cm screws from each corner of the tablet.

    Modifica

  4. Disassembling Coby Kyros MID9742 Outer Casing: passo 3, immagine 1 di 1

    • Place a metal spudger tool in between the front and back panels of the tablet and begin to pry the base from the front panel by moving the metal tool around the perimeter of the tablet.

    • Note that clicking noises will be heard during this process, the panels are assembled well so it may take some force to separate the two panels.

    • Use caution while prying, do not stick the metal spudger in too far as it may damage internal components

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 1 altro collaboratore

Ian Swett

Membro da: 03/11/15

597 Reputazione

5 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

Colorado Springs, Team 5-3, Panko Spring 2015 Membro di Colorado Springs, Team 5-3, Panko Spring 2015

UCCS-PANKO-S15S5G3

3 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 467