Salta al contenuto principale

Disassembling Canon PowerShot SD800 IS Back Cover

Cosa ti serve

  1. Disassembling Canon PowerShot SD800 IS Back Cover, Back Cover: passo 1, immagine 1 di 1
    • Remove one 2.25mm screw on the bottom.

  2. Disassembling Canon PowerShot SD800 IS Back Cover: passo 2, immagine 1 di 1
    • Remove two 2.25mm screws on the right side looking from the front.

  3. Disassembling Canon PowerShot SD800 IS Back Cover: passo 3, immagine 1 di 1
    • Remove one 4.7mm screw on the side with the AV output.

  4. Disassembling Canon PowerShot SD800 IS Back Cover: passo 4, immagine 1 di 1
    • Pull off the back cover.

    • The back cover tends to stick in the top corner (near the mode dial) due to a metal clip. Jiggle the cover side to side as you pull it out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 20-9, Maness Fall 2010 Membro di Cal Poly, Team 20-9, Maness Fall 2010

CPSU-MANESS-F10S20G9

5 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 2,611