Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Disassembling Canon PowerShot SD1100 IS Front and Rear Cover

Cosa ti serve

  1. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover, Front and Rear Cover: passo 1, immagine 1 di 2 Disassembling Canon PowerShot SD1100 IS Front and Rear Cover, Front and Rear Cover: passo 1, immagine 2 di 2
    • Remove wrist strap and battery.

  2. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: passo 2, immagine 1 di 3 Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: passo 2, immagine 2 di 3 Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: passo 2, immagine 3 di 3
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

  3. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: passo 3, immagine 1 di 3 Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: passo 3, immagine 2 di 3 Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: passo 3, immagine 3 di 3
    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

  4. Disassembling Canon PowerShot SD1100 IS Front and Rear Cover: passo 4, immagine 1 di 1
    • The cases should now be removed.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Team

Cal Poly, Team 3-32, Regan Winter 2011 Membro di Cal Poly, Team 3-32, Regan Winter 2011

CPSU-REGAN-W11S3G32

3 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 3,392