Introduzione
This guide will instruct the user on how to remove the front cover of the Canon A590 IS.
Cosa ti serve
-
-
-
Remove the screw located under the rubber flap on the left side of the camera using a Phillips #00 screwdriver.
-
-
-
Press and hold down the button shown in the blue circle.
-
While pressing the button, rotate the lens cover in a counter-clockwise direction to remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 5 persone hanno completato questa guida.
3 Commenti
A handy guide. I had an A590IS with a broken battery door latch on the camera body, and I managed to obtain a dead A590IS with a fully intact latch for free. So using this guide I swapped the body shells over! All fixed and working again!