Salta al contenuto principale

Disassembling Cambridge Audio A3i Case

Cosa ti serve

  1. Disassembling Cambridge Audio A3i Case, Case: passo 1, immagine 1 di 1
    • Remove 2 screws from each side of the amplifier.

  2. Disassembling Cambridge Audio A3i Case: passo 2, immagine 1 di 1
    • Remove 2 screws on rear of device. Slide top cover up and back from main case.

  3. Disassembling Cambridge Audio A3i Case: passo 3, immagine 1 di 2 Disassembling Cambridge Audio A3i Case: passo 3, immagine 2 di 2
    • Remove 3 screws on bottom of case.

    • Remove 13 screws on rear panel.

    • Do not move the rear panel too far, as the power cord is still connected.

  4. Disassembling Cambridge Audio A3i Case: passo 4, immagine 1 di 1
    • Using a pair of pliers, squeeze the retainer for the power cord as shown and pull it toward the external side the panel.

    • It may require some wiggling, but it should slip out of the hole and then off of the cord.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Colby

Membro da: 04/15/10

338 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 28-36, Regan Spring 2010 Membro di Cal Poly, Team 28-36, Regan Spring 2010

CPSU-REGAN-S10S28G36

4 Membri

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 4,108