Salta al contenuto principale

Disassembling Apple AirPort Extreme Model A1034 Outer Case

Cosa ti serve

  1. Disassembling Apple AirPort Extreme Model A1034 Outer Case, Outer Case: passo 1, immagine 1 di 1
    • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

  2. Disassembling Apple AirPort Extreme Model A1034 Outer Case: passo 2, immagine 1 di 1
    • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

  3. Disassembling Apple AirPort Extreme Model A1034 Outer Case: passo 3, immagine 1 di 2 Disassembling Apple AirPort Extreme Model A1034 Outer Case: passo 3, immagine 2 di 2
    • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

  4. Disassembling Apple AirPort Extreme Model A1034 Outer Case: passo 4, immagine 1 di 1
    • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Travis Go

Membro da: 10/12/11

158 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 17-15, Regan Fall 2011 Membro di Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 Membri

13 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 2,759