Introduzione

Disassembly

1. Flip toaster over.

2. Locate four phillips screws on the bottom of the toaster.

3. Loosen and remove.

4. Sides will pop out once screws are removed.

  1. 1. Flip toaster over.
    • 1. Flip toaster over.

    Aggiungi Commento

  2. 2. Locate four phillips screws on the bottom of the toaster.
    • 2. Locate four phillips screws on the bottom of the toaster.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • 3. Loosen and remove using a Phillips head screwdriver

    Aggiungi Commento

    • 4. Sides will pop out once screws are removed.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Carlos

Membro da: 23/07/2013

101 Reputazione

1 Guida realizzata

Hi Carlos,

Before removing the cover I need to remove the PUSH LEVER.

Please forward instructions on HOW TO REMOVE THE PUSH LEVER.

Thank you.

Earle

earleb - Replica

I Disassembled, cleaned and put it back together.  However the purpose of the exercise was to fix the browning feature or timing issue.  the little plastic bit that goes from the browning turn knob does not function.  So the push knob does not stay down.  This results in having to hold the push knob down till the toast is done to my satisfaction.  The little plastic bit does not connect properly to the PCB or whatever else it is connected to, and so the push knob on the side of the toaster does not stay down.. Allan

Allan Rodrigues - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 9

Tutti i Tempi: 658