Salta al contenuto principale

Disable Auto Boot

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.
  1. Disable Auto Boot, Disable Auto Boot: passo 1, immagine 1 di 3 Disable Auto Boot, Disable Auto Boot: passo 1, immagine 2 di 3 Disable Auto Boot, Disable Auto Boot: passo 1, immagine 3 di 3
    • Before starting this procedure, you must disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide or follow the abbreviated instructions below to disable Auto Boot.

    • Power on your Mac and launch Terminal.

    • Copy and paste the following command (or type it exactly) into Terminal:

    • sudo nvram AutoBoot=%00

    • Press [return]. If prompted, enter your administrator password and press [return] again. Note: Your return key may also be labeled ⏎ or "enter."

    • You can now safely power down your Mac and open the bottom case, without it accidentally powering on.

    • When your repair is complete and your Mac is successfully reassembled, re-enable Auto Boot with the following command:

    • sudo nvram AutoBoot=%03

Conclusione

Congrats! You're done.

Un'altra persona ha completato questa guida.

Jeff Suovanen

Membro da: 08/06/13

427.002 Reputazione

259 Guide realizzate

Team

iFixit Membro di iFixit

Staff

136 Membri

16.559 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 310