Introduzione

This guide will allow readers to replace the filter on their Dirt Devil Scorpion Quick Flip hand vacuum. There are several reasons to replace a filter. It may be too dirty to clean, punctured, or otherwise broken.

Press the button on the handle of the vacuum to trigger the release mechanism.
  • Press the button on the handle of the vacuum to trigger the release mechanism.

  • This should allow the front part of the vacuum to detach from the back half of the unit as pictured here.

Aggiungi Commento

Once the front module has been detached, identify the filter within the front module.
  • Once the front module has been detached, identify the filter within the front module.

  • Firmly grasp the filter. Pull it out of the front module. Examine the filter to see if it is broken and needs to be replaced or if it is only dirty and clogged.

  • If the filter does not need to be replaced, clean the filter using running water or compressed air.

Aggiungi Commento

  • Rotate the filter counterclockwise to remove it from the plastic holdings.

  • Replace with the new filter.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Joseph Warner

Membro da: 11/11/2017

201 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G1, Wilson Fall 2017 Membro di IUPUI, Team S1-G1, Wilson Fall 2017

IUPUI-WILSON-F17S1G1

4 Membri

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 16

Tutti i Tempi: 154