Introduzione

This guide will allow readers to replace the filter adapter on their Dirt Devil Scorpion Quick Flip hand vacuum. The primary reasons to change a filter adapter include improper suction or visible damage to the current filter adapter.

  1. First, press the button on the handle of the vacuum to separate the two halves.
    • First, press the button on the handle of the vacuum to separate the two halves.

    • The button triggers a release mechanism, detaching the front half from the back of the vacuum.

    Aggiungi Commento

  2. Once the front half has been separated from the back half, locate the filter adapter.
    • Once the front half has been separated from the back half, locate the filter adapter.

    • The filter adapter is attached to the filter, locating the filter in this step will sufficiently locate the filter adapter.

    • Grasp the filter and adapter. Pull them out together.

    Aggiungi Commento

    • Rotate the filter counterclockwise to remove it from the filter adapter.

    • Once the filter adapter has been removed from the filter, replace it.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Joseph Warner

Membro da: 11/11/2017

201 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G1, Wilson Fall 2017 Membro di IUPUI, Team S1-G1, Wilson Fall 2017

IUPUI-WILSON-F17S1G1

4 Membri

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 50