Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Press the button found in the middle of the vacuum downwards. Then, separate the front from the back of the device by gently pulling apart.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Separate the front and the back and set the front aside.
-
Pull on the back of the vacuum, there should not be too much resistance when pulling it out.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew each individual 13 mm screws from the vacuum with a micro screwdriver.
-
Once unscrewed, pull the case of the Dirt Devil Gator apart.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the grey switch from the top of the device by pulling gently. Then, remove the complete motor by also pulling gently out of socket.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the motor from your Dirt Devil Gator exterior by slightly pulling out the white motor.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder each of the wires from the old circuit board, and solder them to the new circuit board in the same orientation.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.