Salta al contenuto principale

Direct-Drive Cleaner Head Brush Bar Replacement

Cosa ti serve

  1. Direct-Drive Cleaner Head Brush Bar Replacement, Brush Bar: passo 1, immagine 1 di 2 Direct-Drive Cleaner Head Brush Bar Replacement, Brush Bar: passo 1, immagine 2 di 2
    • First, make sure the device is unplugged and detached from the wand

    • Use a quarter to unlock the fastener marked by padlocks, turning it counter clockwise

    • Padlocks

  2. Direct-Drive Cleaner Head Brush Bar Replacement: passo 2, immagine 1 di 1
    • Slide the brush bar away from the cleaner head

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Team

UW Tacoma, Team S1-G5, Rose Fall 2017 Membro di UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 Membri

15 Guide realizzate

2 Commenti

While a clogged head was not the reason my Dyson V8 was stuttering, logic prompted me to check the big tube for an obstruction. My Dyson had a hairball as a result of picking up after my cat. Thank you!

John McCormick - Replica

My daughters Dyson V8 head is not powering the tube and rotating head. I have a Dyson V10 animal which I can attach to the V8 tube and rotating head and operates, so the problem is in the power head. I have cleaned the contacts and don’t know what else to do. Any suggestions?

Tom Murphy - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 7

Ultimi 7 Giorni: 57

Ultimi 30 Giorni: 201

Tutti i Tempi: 35,198